Innehållet kan inte visas

Origin Acoustics C68 In-Wall /styck

Composer C68. Rectangular In-Wall 2-Way Speaker With A 4x8 Kevlar® Woofer And Exclusive DPSD™ Tweeter Technology
Mer produktinformation
Garanti i 24 månader

Kontakta oss för frågor eller köp!

Composer C68

Rectangular In-Wall 2-Way Speaker With A 4x8 Kevlar® Woofer And Exclusive DPSD™ Tweeter Technology


When the paradigm shift from cabinet speakers to in-wall speakers took place decades ago, this was the size for which everyone clamored. It was small enough to be discreet while being large enough to produce both full frequency and enough sound pressure to fill a room. The C60 Collection dramatically renews this tradition with advanced driver technology and a very attractive form factor. It is perfect in the bedroom or the bathroom and is great for both music and theater sound.

Tech details

Dual Plane Stabilized Diaphragm (DPSD™)

A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion.

Going Low

The heart of the Composer C68 is the bass section featuring a Kevlar® woofer that creates the sonic foundation. Measuring 4"X 8" it has the same surface area as a 6 ½" round driver but it allows the overall footprint of the speaker to be much thinner and more attractive.

EQ Adjustments

Two switches on the baffle and behind the grille allow for fine-tuning of the system by attenuating bass and treble response. Placement of the speakers is often affected by the room layout and placement of the television and furniture. The ability to adjust the frequency response of each speaker to compensate for adjacent walls and other architectural features is very important.

X-Wave Woofer Surround

While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround.

Progressive Suspension

As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver's frequency range.

Compression Molded Woofer Baskets

Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance.

Spring Into Action

Securely mounting the speaker inside the wall is a necessity for full fidelity performance. The unique SpringLock™ mechanism in the Composer Collection clamps against the inside of the drywall creating uniform torque at each pressure point. This assures that the baffle will not warp and the integrity of the seal between the baffle and the drywall will remain constant.

Magnetic Grille

A paintable, perforated grille with a thin bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy.

Specifications

Model Number: C68
Part Number: SWM12800
Tweeter Dome: Silk DPSD
Tweeter Diameter: 1" (25mm)
Woofer Cone: Kevlar
Woofer Dimensions: 4 x 8" (102 x 203mm)
Dimensions: 5 1/2" x 11 3/4'" (140 x 300mm)
Frequency Response: 40Hz-20kHz
Impedance: 8 ohm
Recommended Amplifier Power: 25 watts - 140 watts
Sensitivity: 89dB +/- 3dB
Depth: 3 3/4" (95mm)
Cutout Dimension(s): 4 5/8 x 10 15/16" (118 x 278mm)

Modell
C68 In-Wall /styck
Artikelnummer
1001_80-0027
Varumärke
Jämför produkt
Modellbeskrivning
Modell
Composer C68
Typ av produkt
In-wall högtalare
Aktiv/passiv modell Beskriver om högtalaren är aktiv eller passiv. Passiva högtalare ansluts till en förstärkare via högtalarkabel. Aktiva högtalare har inbyggd förstärkare och behöver därför ingen extra förstärkning. De aktiva ansluts till ett vägguttag (portabla modeller är batteridrivna). Om aktiva högtalarna säljs i par, ansluts ibland endast ena högtalaren till elnätet, varvid andra högtalaren ansluts till den strömförsörjda huvudhögtalaren.
Passiv