Innehållet kan inte visas

Araknis 210 Series Websmart Gigabit Switch with Partial PoE+ and Front Ports

Araknis Networks® 210 Series Websmart Gigabit Switch with Partial PoE+ and Front Ports
Mer produktinformation
Garanti i 24 månader

Kontakta oss för frågor eller köp!

Araknis Networks® 210 Series Websmart Gigabit Switch with Partial PoE+ and Front Ports

For installs that require PoE on a budget, opt for the Araknis Networks® 210-series switch. With it, you get a sizable power budget and full PoE capability on all ports, up to 30W. You can also take advantage of Websmart, which allows you to control PoE and IP settings via OvrC. When it comes to operation, this switch has it all, including plug and play capability, multiple mounting options, and a sleek, 1U design.

Temperature Controlled


Now it’s easier than ever to handle the heat. A smarter design features a honeycomb venting solution and temperature sensor that drives the speed of the fans, allowing for efficient and discreet temperature control. For a completely silent solution, opt for the 8-port switch, which incorporates a fanless design.

Improved GUI


A clear and concise GUI with simple VLAN and Link Aggregation setup makes install work a breeze. And because the GUI is consistent with our routers and WAPs, you can avoid the learning curve altogether.

Rift LED & Mechanical Design


Both stylish and informative, these green LED lights indicate power status, port speed (10/100 Mbps - 1 Gbps), and link status. Plus, a redesigned faceplate is constructed with industrial materials and a glossy finish, making for a clean design you’ll love to show off.

Plug-n-Play


Stop spending time on network configuration. Simply plug this switch in, and you’re ready to go. It’s as easy as that.

1Gbps Throughput


With a powerful 1Gbps on all ports simultaneously, this switch can support the backbone of an install or simply act as a desktop add.

SFP Uplinks


Use this switch’s SFP ports to provide RJ45 uplinks to other devices, and/or fiber uplinks to extend the network over long distances while getting a stronger signal. Featuring a dedicated fabric, they don’t share a backplane with any other ports on the switch, which means you get a full 1 Gbps and don’t have to sacrifice a dedicated PoE port to use them (no combo ports here!).

Control4 Driver for More Customization


Experience greater control and customization with the ability to reboot or power on/off the PoE ports or schedule power cycling for PoE-connected devices. With Control4 “Custom Experience” buttons, your clients control the ability to turn off Wi-Fi and power down IP cameras from the Control4 touch screen or mobile app. To access the driver, search for “Araknis” or “MS” in Composer.

Multi-Mounting


Mounting has never been easier. Due to its 1U design and available accessories, it can easily be mounted in a rack, wall, or anywhere in between. Included rack ears make for a sleek, left-justified design, while optional center-mount rack ears offer a more traditional look. To order center-justified rack ears, visit the corresponding product page.

Partial PoE


When you have a job that needs partial PoE, this switch has you covered. All ports have full PoE capability up to 30W, with a more economical power budget, giving you an efficient switch at a modest price.

Websmart


With Websmart, you receive the benefit of PoE with similar management capabilities of our flagship 310-series switches, making for the perfect balance of manageability and simplicity.

Specifications AN-210-SW-F-48-POE


Rack Spacing

1U

RJ-45 1000BASE-T Ports

48

SFP Uplink 1000BASE-X Ports

4

RJ45 Auto Negotiation

Yes

RJ45 Auto Sensing

Yes

Auto MDI/MDI-X

Yes

POE Ports

48

Flash Memory

32MB

SDRAM Memory

256MB

Packet Buffer

1.5MB

MAC Table Size

16K

Switching Capacity

104Gbps

Forwarding Rate

77.4Mpps

PoE Features

802.3af/at
Auto PD Classification
Max Power Output per Port: 30W
Max Simultaneous Power per Port: 8W

PoE Power Budget

375W

Power Features

Enable/Disable per port
Priority Setting per port
Overloading Protection per port
PoE/1Gbps LED Toggle Setting
PoE Power Withdraw Reading per Port
Power level setting per port

L2 Features

Head-of-line blocking (HOL)
Energy Efficient Ethernet (IEEE 802.3az)

Flow Control

802.3x, Back pressure

Forwarding Mode

Store-and-forward

Spanning Tree

802.1D (STP)
802.1w (RSTP)
802.1s (MSTP)

VLAN Features

802.1Q
VLAN Group
Port-based VLANs
QinQ
Protocol-based VLANs
Voice VLAN

Link Aggregation Features

Static, 802.3ad LACP
Max Ports per group: 8
Max group: 8

Multicast Features

IGMP Snooping v1/v2/v3; MLD Snooping v1/v2
IGMP Querier
IGMP Immediate Leave

Storm Control

Broadcast/Unknown Multi-cast/Unknown Unicast

Jumbo Frame Support

9k

QoS Features

Priority Queues: 8 queues per port
Rate Limiting - Ingress: 1 Kbps/1 pps
Rate Limiting - Egress: 1 Kbps/1 pps
Scheduling: WRR, Strict Priority
CoS: 802.1p, IP ToS Precendence, IP DSCP
DiffServ (RFC2474)

Security Features

Port Security (MAC-based)
802.1x-PNAC (Port-based)
IP Source Guard
RADIUS
HTTPS and SSL
SSH v2.0
MAC Filter

Management Protocols

CLI, Web, Telnet, Cloud-based Managed via OvrC

Management Access Filtering

SNMP/Web/Telnet

SNMP

v1,2c,v3

DHCP

Client

Event Log

local flash
remote server

Management Features

FW Upgrade: TFTP, HTTP
Port Mirroring: One to One, Many to One
sFlow
SNTP
Remote Ping
LLDP (IEEE802.1ab)
Cable Diagnostics
UPnP Client
RMON (1,2,3 and 9 groups)
Dual FW Image

Dimensions (W x H x D)

17.32" x 1.73" x 16.22"

Line Voltage

100-240V AC, 50/60 Hz

Power Consumption

Max: 481.40W
Device: 48.90W
BTU/h (max): 141.05

Operating Temperature

32°F-122°F

Operating Humidity

10-90%

Weight

13.4 lb

Fan Noise

44.8 dBA (≥ 35°C @ 100%)
40.5 dBA (30-34°C @ 75%)
32.4 dBA (<29°C @ 50%)

Modell
210 Series Websmart Gigabit Switch with Partial PoE+ and Front Ports
Artikelnummer
AN-210-SW-F48POE
Varumärke
Jämför produkt